DetailPro™ Acrylic Markers
LayersCrafts DetailPro™ Acrylic Markers
These acrylic colors are designed to bring 3D prints, miniatures, models and creative details to life.
Complete Your Bench — Save
Tick to add
Raw Print In. Display Piece Out.
Direct Liquid Flow · Up To 240 Colors · No Pressing Needed
The grey plastic look ends here. Water-based acrylic markers built for PLA, resin, props and minis — uncap and the ink flows on contact, no pumping, no priming, no shaking. Opaque color on the first pass, on light surfaces and dark. Plus a free STL vault so you have something worth finishing on day one.
From Raw Print To Showpiece
Every print comes off the bed the same way — flat, grey, forgettable. A few strokes of DetailPro™ later, it's the piece people pick up and ask about.
Before · Raw Print
✦ After DetailPro™
Display It Proudly
Turn shelf clutter into the centerpiece guests can't stop asking about.
Sell It For More
A painted print asks a different price than a raw one at a craft fair or on Etsy.
Feel Like An Artist
No painting experience needed — uncap, touch the surface, and the color flows on its own.
Same print. Same printer. The only difference is DetailPro™.
Built To Finish The Job
Five reasons a set of craft-store markers won't get your prints looking like this.
Never Hunt For A Shade Again
Most kits leave you one colour short of finishing a model. Up to 120 shades covers skin tones, armour metallics, and every gradient between — so you finish the print you started, not the one your palette allowed.
- ✓48, 60, 72 or 120 — pick your kit
- ✓Full skin-tone and metallic range
- ✓Consistent pigment, batch to batch
- ✓Blendable for custom shades
No Brushes. No Setup. No Cleanup.
Uncap, colour, done. No water pot, no thinning ratios, no palette to mix — and no brushes to wash between colours. Save time and space: one marker does the work of a drawer full of painting supplies.
- ✓Uncap and create — zero prep
- ✓No cleanup between colours
- ✓Save time & space on the bench
- ✓Works on PLA, resin, wood and card
Open The Cap. Start Painting.
No pumping. No priming. No shaking a marker on the desk hoping it wakes up. The ink feeds straight to the tip and flows the moment it touches the surface — so the first stroke looks like the last one, with no pressure and no flooding.
- ✓No pressing — ink flows on contact
- ✓Soft fiber tip holds a clean edge
- ✓Even coverage, first stroke to last
- ✓Water-based acrylic ink, low odour
Bright On White. Bright On Black.
Most markers vanish the moment they hit dark plastic. Water-based acrylic ink sits on top of the surface instead of soaking into it — so a yellow reads as yellow on grey PLA, black resin and raw wood alike. One pass, full colour.
- ✓Opaque on light and dark surfaces
- ✓PLA, resin, wood, card, stone, glass
- ✓Dries to a solid, even finish
- ✓Layer colours once the first pass dries
Create The Art. Not The Mess.
Loose markers roll off the bench, dry out, and go missing. The portable case keeps every colour upright, labelled and in reach — so setup takes seconds and nothing gets lost between sessions.
- ✓Portable case included
- ✓Every colour visible at a glance
- ✓Stores upright — ready when you are
- ✓Take it to meets, cons and workshops
Everything above ships in one box — markers and case.
Nothing else to buy before your first finished print.
Real Prints. Really Painted.
Every model below was finished with the DetailPro™ Marker Kit — straight from our makers' workbenches.
Colors pop beautifully on PLA — zero streaks.
The fine tip nailed every tiny detail.
White covered dark filament in two coats.
Dries fast — no smudges, no fingerprints.
From grey print to display piece in one evening.
Details came out crisp — even the tiny parts.
Easy enough that my kids paint with me now.
Way more precise than spray paint for small parts.
The metallics on this one — absolutely stunning.
Beats every craft store marker I've tried.
No streaks, no brush marks, just smooth color.
Painted a whole batch for the craft fair. Sold out.
The dual tip does base coats and details alike.
Blended the gradient wet — worked like a charm.
Looks airbrushed. It's just the markers.
The Maker's
STL Vault
New markers and nothing to paint? Solved. 30+ premium STL collections land in your inbox after checkout — print-ready designs to finish from day one, commercial license included, so what you make you can also sell.
If You Print It, You Can Finish It.
Whatever comes off your printer — minis, props, prototypes or products — this is the kit that makes it look done.
3D Printing Enthusiasts
Stop shelving grey prints. Colour turns a test print into a keeper.
PLA · ResinCosplay Creators
Shading, weathering and battle damage on props and armour — no airbrush booth.
Props · ArmorMiniature Painters
A soft fiber tip steady enough for trim, panels and basework.
Miniatures · FigurinesResin Artists
Acrylic ink that sits on cured resin without primer or sealing coats.
Resin · UV PrintsEtsy & STL Sellers
A finished product photo asks a different price than a raw one.
Handmade · EtsyPrototype Builders
Colour-coded parts and client-ready demos without a paint shop.
Prototypes · DemosDIY Hobbyists
If you can colour inside a line, your first project will look pro.
DIY · BeginnerCompetition Makers
The finish is what judges see first. Make the table stop at yours.
Events · Contests
The Gift That Gets Used
Same Markers. Pick Your Palette.
Every kit has the same direct-flow acrylic markers and portable case. The only question is how many shades you want on the bench.
Essential Colors
Essential Maker Kit
The core palette. Enough to finish your first prints properly.
Best For
First-time finishers — test the workflow without committing to the full wall of colour.
Precision Colors
Starter Kit
More range for everyday prints and regular projects.
Best For
Casual makers — essential shades plus room to experiment on everyday prints.
Professional Colors
Professional Kit
The sweet spot — full skin tones and extended metallics without the full-wall price.
Best For
Serious makers & mini painters — detailed cosplay, figurines and products you sell.
Ultimate Maker Colors
Ultimate Maker Kit
Every shade, tone, neon and metallic. Nothing left to buy.
Best For
Pros & STL sellers — competition finishes and client work with zero colour gaps.
| Feature | Essential 48 Colors |
Starter 60 Colors |
Professional 72 Colors |
Ultimate 120 Colors |
|---|---|---|---|---|
| Marker Count | 48 | 60 | 72 | 120 |
| Direct Liquid Flow | ✓ | ✓ | ✓ | ✓ |
| Water-Based Acrylic Ink | ✓ | ✓ | ✓ | ✓ |
| Storage Case | ✓ | ✓ | ✓ | ✓ |
| Metallic Tones | Core | Basic | Extended | Full Range |
| Skin Tone Range | Basic | Limited | Full | Complete |
| Neon & Pastel Shades | — | Few | Some | ✓ All |
| Best For | First Kit | Casual Makers | Serious Makers | Professionals |
Complete Your Bench — Save
Tick to addFrequently Asked Questions
PLA prints, resin models, wood, card, stone, glass, cosplay props, figurines and prototypes. Any dry, reasonably smooth surface takes the ink cleanly — no primer needed.
Same markers, same case in every kit — the only difference is colour range. The 48 covers the core palette, the 60 adds everyday variety, the 72 brings full skin tones and extended metallics, and the 120 has everything: neons, pastels, deep tones and the complete metallic range.
No. These are direct liquid flow markers — the ink feeds straight to the soft fiber tip, so it starts flowing the moment the tip touches the surface. No pumping, no priming, no shaking, and no pressing down to force colour out.
Yes. The ink is water-based acrylic, so it sits on top of the surface rather than soaking in — a yellow reads as yellow on black resin the same as it does on white PLA. Let the first pass dry before layering a second colour over it.
If you can colour inside a line, you can do this. Markers are far more forgiving than brush paint — no thinning ratios, no brush control to learn. Most people get a result they're proud of on their first print. And if you don't, the guarantee below covers you.
Yes — and you should. Finished, coloured prints photograph better and sell differently than raw single-colour prints on Etsy and at markets. Plenty of makers use these to finish products, not just as a hobby.
The Smooth Finish Guarantee: finish one print. If it isn't visibly cleaner and sharper than anything you've printed before, message us within 30 days for a full refund. No forms, no return shipping fights.
Orders are dispatched within 24 hours. No month-long overseas wait — your kit ships from stock, and you'll have tracking the same day it leaves.
The 72-colour Professional Kit. It's the sweet spot — full skin tones and extended metallics for miniatures, cosplay and products you sell, without paying for shades you may never open. Buying a first kit ever? The 48 is a low-risk way in.
Quick Facts
Still have a question? We reply within 24 hours.